MonoMark GB1.5

No TSPM05

New

Drop-on Glass Beads having refractive index of 1.5

MonoMark GB 1.5 is Standardized surface pavement markings found at airports provide directional and control information. Airport traffic must continue to move in an expeditious and safe manner using these markings for guidance. This theory is no different from that used on a highway. Painted pavement markings are essential guiding elements that are rarely noticed unless they are not functioning, causing much confusion. Runway incursions are similar to a motorist failing to properly observe and obey traffic signals. Glass beads in airport surface pavement markings provide directional guidance to pilots and airport vehicles. When a beam of light hits the bead, it will reflect the light back to the viewer - much like a tiny mirror. The value of light returned or “reflected” is controlled by the Index of Refraction (IOR). The higher the index, the more intense the light ray becomes to the eye. Primarily, there are two types of beads approved for use at airports under Federal Specification TTB-1325C.

*Condition Apply

Buy More ! Get Application Free !

MOQ - Minimum Gross PO Value should be at par or more than INR ₹ 100000/-

CUSTOMER SCOPE OF ARRANGEMENT

  1. Scaffolding Arrangement
  2. Shelter for Material Security (with lock and key)
  3. Accommodation for Technicians/ Applicators (Bachelor/Dormitory/Labor)
  4. Food Arrangement/Subsidized rates at Canteen
  5. Water / Electricity.

More details

No reward points for this product.


817 ₹

Add to wishlist

Data sheet

Net Weight / Pack Size2.5 kg
Cost / kg₹ 220.63 (Inclusive of All Taxes)
Coverage"70 RMT/ 2.5 Kg "
Consumption"0.035 kg /RMT"
Application ProcedurePlease refer the TDS (Technical Data Sheet) for Application Instruction
Contact For Local Application Assistanceservice@monarchindia.net
Indicative Material Cost / RMTR₹ 6.87 (Inclusive of All Taxes)
Indicative Material Cost / RFT₹ 2.08 (Inclusive of All Taxes)

More info

MonoMark GB1.5 - Drop-on Glass Beads having refractive index of 1.5 

Description:

MonoMark GB 1.5 is Standardized surface pavement markings found at airports provide directional and control information. Airport traffic must continue to move in an expeditious and safe manner using these markings for guidance. This theory is no different from that used on a highway. Painted pavement markings are essential guiding elements that are rarely noticed unless they are not functioning, causing much confusion. Runway incursions are similar to a motorist failing to properly observe and obey traffic signals. Glass beads in airport surface pavement markings provide directional guidance to pilots and airport vehicles. When a beam of light hits the bead, it will reflect the light back to the viewer - much like a tiny mirror. The value of light returned or “reflected” is controlled by the Index of Refraction (IOR). The higher the index, the more intense the light ray becomes to the eye. Primarily, there are two types of beads approved for use at airports under Federal Specification TTB-1325C.

Type I and IV beads have an IOR of 1.5 and are commonly referred to as low index beads. They are traditionally made from recycled glass and were developed as an economical way of providing safe delineation on roadways. These beads offer minimum visibility, maintain the shortest life cycle and provide the least effective safety benefit.

Product Features:

  • Longer retention of glass beads giving extended retro reflectivity/night time visibility

  • Environmentally friendly

  • Reduced disposal cost

  • Easy clean-up

  • Increased worker safety

  • Enhanced opacity

Typical Applications:

  • Asphalt

  • concrete roads

  • kerbstones 
  • speed humps

  • other areas with light traffic

  • curbstone
  • traffic crossings

  • service stations
  • parking areas

Application video:

CROSS REFERENCE CHART
Monarch ThermoshieldMascoatSun cool CoatingInsuladdNansulate

MonoMark GB1.5

NA
NA
NA
NA
NA

Reviews

No customer comments for the moment.

Write a review

MonoMark GB1.5

MonoMark GB1.5

Drop-on Glass Beads having refractive index of 1.5

MonoMark GB 1.5 is Standardized surface pavement markings found at airports provide directional and control information. Airport traffic must continue to move in an expeditious and safe manner using these markings for guidance. This theory is no different from that used on a highway. Painted pavement markings are essential guiding elements that are rarely noticed unless they are not functioning, causing much confusion. Runway incursions are similar to a motorist failing to properly observe and obey traffic signals. Glass beads in airport surface pavement markings provide directional guidance to pilots and airport vehicles. When a beam of light hits the bead, it will reflect the light back to the viewer - much like a tiny mirror. The value of light returned or “reflected” is controlled by the Index of Refraction (IOR). The higher the index, the more intense the light ray becomes to the eye. Primarily, there are two types of beads approved for use at airports under Federal Specification TTB-1325C.

*Condition Apply

Buy More ! Get Application Free !

MOQ - Minimum Gross PO Value should be at par or more than INR ₹ 100000/-

CUSTOMER SCOPE OF ARRANGEMENT

  1. Scaffolding Arrangement
  2. Shelter for Material Security (with lock and key)
  3. Accommodation for Technicians/ Applicators (Bachelor/Dormitory/Labor)
  4. Food Arrangement/Subsidized rates at Canteen
  5. Water / Electricity.

Write a review

30 other products in the same category:

Download

Company Profile - CC

We are in the business of Repair,Maintenance, Protection & Improvement of old & new assets in Buildings, Civil Infrastructure,Machinery, Equipment and Structural. Monarch's technologically advanced solutions significantly contribute tooptimize your plant productivity /efficiency withoutany interruptions ofdowntimeandbreakdowns

Download (835.07k)